Ignition Repair in Phoenix

In case the ignition switch does not work, then you are left with the problem of being unable to unlock and drive the car due to its inability to start. The good news is that ignition problems are usually mechanical in nature, and thus do not require towing the car away to replace the entire steering column in order for repairs to be made. We here at Car Key Replacement Phoenix AZ are geared up to tackle all your problems by ensuring our mobile vans have your ignition cylinders, wafers, key blanks, and programmers ready.

Ignition Symptoms and What They Usually Mean

If the key does not turn in the ignition, this might be because of old wafers in the cylinder, an old key, or steering wheel lock pressure on the ignition. If the key does turn but nothing happens, the culprit may be the electrical ignition switch behind the cylinder. If the key gets stuck and does not turn, it might be an indicator of a shifter interlock or damage in the ignition itself. If one always has to turn the steering wheel or wiggle the key to make the car start, it is wise to check the ignition before it breaks down completely.

What Actually Wears an Ignition Out

There are two main issues that can cause ignition problems for cars in Phoenix, the first one is the most common one and it is mater fatigue a normal wear and tear, as the wafers in the ignition cylinder get worn out over the years, the second one is more significant and ita a mate of an improperly duplicated key. When a key is duplicated too many times, it loses its exact matching properties to the ignition, and starts performing poorly. In case you have two keys that perform very differently in your car ignition, it may be a case of a bad key rather than a faulty ignition.

Repair or Replace the Cylinder

First, our technician will check what is wrong with your ignition system in order to recommend replacement parts. It may be that all you need to do is cut a key according to the right specifications, and it will be cheaper than installing an entirely new ignition cylinder. In case the ignition cylinder is worn out or broken, it is either rebuilt or replaced, depending on the situation. Whenever feasible, the replaced or fixed ignition cylinder would be the same as the other cylinder, and hence the same key would work on the ignition and door locks.